Vox VC-12 Spezifikationen PDF herunterladen (Seite 8)

8

Selecting Programs

Once you’re in Channel Select Mode, you’re

ready to select a program. Valvetronix amps

contain 32 programs organized into eight

banks, with four programs in each bank.

1. Use the BANK UP/DOWN switches to

select a bank (1, 2, 3, 4, 1., 2., 3., 4.).

The number of the selected bank flashes

on the BANK display.

2. Use switches 1 through 4 to select a

program.

The bank number stops flashing and the

switch’s LED comes on.

That completes the procedure for selecting

programs.

If you want to select another program in

the same bank, there’s no need to specify

the bank. For example, say you’re using

program 3-1 and want to switch to program

3-3. As long as you’re in Channel Select

Mode, simply press switch #3.

Effect On/Off Mode

In Effect On/Off mode, you can switch the

Pedal, Modulation, Delay, and Reverb sec-

tions on and off individually using switches 1

through 4. You can also select programs,

which is explained at the end of this section.

Selecting Effect On/Off Mode

In Effect On/Off mode, the BANK display

shows and the CHANNEL–FX ON/OFF

switch LED is on. If this is not the case, you

can select Effect On/Off mode using the

following methods:

• If the BANK display is showing a bank

number, Channel Select Mode is selected,

in which case you need to press the

CHANNEL–FX ON/OFF switch to select

the Effect On/Off mode.

• If the BANK display shows , , or a

note name, the Tuner is on. Press the

TUNER switch to turn off the tuner and

return to the previous mode. If the BANK

display shows , you are already in

Effect On/Off mode. If it shows a bank

number, you are in Channel Select Mode

and need to press the CHANNEL–FX ON/

OFF switch to select the Effect On/Off

mode.

• If the BANK display is flashing, you must

have selected another bank but not yet

selected another program. Press the

CHANNEL–FX ON/OFF switch to return to

the previous mode.

• If the BANK display shows , your

Valvetronix amp is in Manual mode, in

which case you’ll need to cancel Manual

mode on your amp before proceeding.

Switching Effects On & Off

Once you’re in Effect On/Off mode, you’re

ready to turn the individual effects sections

(Pedal, Modulation, Delay, Reverb) on and off

by using switches 1 through 4. LEDs 1–4

indicate whether each effects section is on or

off.

Selecting Programs in Effect On/Off

Mode

You can select programs in Effect On/Off

mode as follows.

1. Use the BANK UP/DOWN switches to

select a bank (1, 2, 3, 4, 1., 2., 3., 4.).

The number of the selected bank flashes

on the BANK display.

2. Use switches 1 through 4 to select a

program.

The bank number stops flashing, the

switch’s LED comes on, and the VC-12 is

now in Channel Select Mode.

Note: In Effect On/Off mode, you cannot

select another program in the same bank

without first specifying the bank. Switching

directly to another program in the same bank

can only be performed in Channel Select

Mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Kommentare zu diesen Handbüchern

Keine Kommentare