Vox VC-12 Spezifikationen PDF herunterladen (Seite 11)

11

Volume pedal curve

The VC-12SV lets you choose one of three curves

by which the volume will change when you

operate the volume pedal.

Pedal position

Volume

returned

Soft

dvanced

Loud

1

2

3

• Curve 1: The volume change will be gradual

during the early range of pedal movement, and

will become steeper during the later range of

pedal movement.

• Curve 2: This is the most typical volume

change curve. This curve is selected when the

VC-12SV is shipped from the factory.

• Curve 3: The volume change will appear to be

more significant during the early range of

pedal movement, and perceptually less during

the later range of pedal movement.

Changing the volume curve

You can switch between the three available

volume curves as follows. This setting is remem-

bered until the next time you change it.

1. Power-off the connected device.

2. While holding down the BANK UP switch

and foot switch [1], [2], or [3], power-on the

connected device.

The BANK display will indicate the name of

the selected curve (“C1,” “C2,” or “C3”) for one

second.

Troubleshooting

Power does not turn on

• Is the VC-12SV’s VOX BUS MAIN connector

connected correctly?

➔ Check the connection. Power will not be

supplied to a device connected via the VOX

BUS SUB connector.

• Is the connected device powered-on?

• Could the connection cable be broken?

No sound

• Is your guitar connected correctly?

➔ Check the connection.

• Could your guitar’s volume be turned down?

• Could the Silent Tuner function be operating?

• Could the volume pedal be in the minimum

position?

➔ Check the setting.

• Could the guitar cable be broken?

Effect is not applied when you turn the effect

on

• Could the connected device be set to bypass

the effect?

➔ Check the settings of the connected device.

The effect will not be available if it is bypassed.

Can’t turn on an effect

• Could the effect type be set to OFF (no effect

used) within the connected device?

➔ Check the settings of the connected device.

On some products, you can set the effect type

to OFF.

Can’t control the effect by operating the

expression pedal or volume pedal

• Is the function of the expression pedal or

volume pedal set correctly on the connected

device?

➔ Check the settings of the connected device.

Volume pedal is difficult to use

• Is the volume pedal set to the appropriate

volume curve?

➔ Check the setting as described in “Volume

pedal curve” (p.11).

Effect or volume fails to reach the maximum

when you advance the expression pedal or

volume pedal, or fails to reach the minimum

when you return the pedal

• Have you adjusted the pedal sensitivity?

➔ Adjust the sensitivity of the expression pedal

or volume pedal as described in “Adjusting the

sensitivity” (p.10).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare